Project

Specifications

Power input

Rated input voltage (V)

Single-Phase 220V(-15%+30%)

3-phase 220 V (-15%+30%)

3-phase 380 V (-15%+30%)

Rated input current (A)

See table 2-1

Rated input frequency(Hz)

50Hz/60Hz,tolerance±5%

Power output

Applicable motor(kW)

See table 2-1

Rated output current(A)

See table 2-1

The maximum output voltage(V)

0rated input voltage, error<±3%

The maximum output frequency(Hz)

0.00600.00 Hz,unit0.01Hz

Control

characteristics

V/f patterns

V/f control

Sensor-less vector control 1

Speed range

1:50 (V/f control)

1:100 (sensor-less vector control 1)

Speed accuracy

±0.5% (V/f control)

±0.2% (sensor-less vector control 1 )

Speed fluctuation

±0.3% (sensor-less vector control 1 )

Torque response

< 10ms (sensor-less vector control 1 )

Starting torque

0.5Hz: 180% (V/f control, sensor-less vector control 1)

Basic functions

Carrier frequency

0.7kHz16kHz

Overload capability

G Model:150% Rated Current 60s,180% Rated Current 10s,200% Rated Current 1s.

Torque boost

Automatic torque boostManual torque boost 0.1%30.0%

V/F Curve

Three ways:Three ways: straight; multi-point type; N Th-type V / F curve(1.2 Th -type,1.4 Th -type,1.6 Th -type,1.8 Th -type,2 Th -type)

Acceleration and deceleration Curve

Line or curve acceleration and deceleration mode.

Four kinds of acceleration and deceleration time,Ramp Time Range :0.06000.0s

DC brake

DC brake start frequency: 0.00600.00Hz

DC brake time:0.0s10.0s

DC brake current:0.0%150.0%

Basic functions

Jog brake

Jog frequency range:0.00Hz50.00Hz.

Jog deceleration time: 0.0s6000.0s.

Simple PLC,Multi-speed

Through the built-in PLC or control terminal to achieve up to 16 speed running

Built-in PID

Facilitate the realization of process control loop control system

Automatic voltage adjustment(AVR)

When the grid voltage changes, can automatically maintain a constant output voltage

Fast current limit function

Minimize over current fault protection inverter running

Over voltage Over current

System automatically limits of current and voltage during operation to prevent frequent

Run

Command source

Given the control panel, control terminal, serial communication port given.

Frequency given

Sevkeinradlswoafysfrtoeqsuweintcchy sources: digital setting, keyboard potentiometer setting, analog

Voltage, given analog current reference pulse is given, the serial port is given, multi-speed given, PLC is given, the process PI D reference. There are several ways to switch

Input terminal

5Switch input terminals, one way to make high-speed pulse input.

2-channel analog inputs,1-way voltage and current options,1- way to support input

output

terminal

1-way switch output terminal

1 relay output terminals

1 analog output terminal, and optional voltage and current.

Protection

function

Provide fault protection dozen:Overcurrent,Overvoltage,Undervoltage,Overtemperature,Overload Etc Protection.

Display and keyboard

 LED Display

Display and keyboard

Environment

 Mr. Cui

Tel: 86-755-86922096

Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Printable Page   Bookmark this page
Sitemap   XML  

About HiSupplier   Help Center    Customer Service   Friend Links   Site Map   Archives
Browse by: China Suppliers - Hot Products - Products Directory - Offers Directory - Suppliers Directory - Buyers Directory
Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español

Copyright © HiSupplier.com Online Inc. All Rights Reserved.